Detailed Product Description

Q3HB64MA
Introduction
Q3HB64MA is constant angle ,constant torque microstepping driver. This type driver supplies regulated phase current for supply voltage from 12v-40vdc. It is designed for use with the 3-phase hybrid stepper of all kinds with 4286mm outside diameter & 5.8A current max. The circuity that it adopts is similar to the circuit of servo control in theory which enable the motor run smoothly at low speed nearly without vibration & noise,output much greater torque at high speed than 2-phase & 5-phase hybrid stepper. The precision of location is up to 60,000 steps/rev.
Features
         High reliability,Low cost
         16 channel constant angle constant torque microsteps. Highest resolution up to 60,000 steps/rev.
         Unique control circuitry.
         Highest response frequency up to 200Kpps.
         Winding current will be reduced to set value when no step pulse command is received for 0.1 second.
         Bipolar constant current chopping mode.
         Optically isolated signals I/O.
         Driver current is continually adjustable from 0.5A/phase to 5.8A/phase.
         Single power supply( DC12-40V)

Q3HB110M
Introduction
Q3HB110M is constant angle ,constant torque microstepping driver. This type driver supplies regulated phase current for supply voltage from AC40-110V. It is designed for use with the 3-phase hybrid stepper of all kinds with 86110mm outside diameter & 5.2A current max. The circuity that it adopts is similar to the circuit of servo control in theory which enable the motor run smoothly at low speed nearly without vibration & noise,output much greater torque at high speed than 2-phase & 5-phase hybrid stepper. The precision of location is up to 30,000 steps/rev.
Features
         High reliability,Low cost
         16 channel constant angle constant torque microsteps. Highest resolution up to 30,000 steps/rev.
         Unique control circuitry.
         Highest response frequency up to 200Kpps.
         Winding current will be reduced to set value when no step pulse command is received for 0.1 second.
         Bipolar constant current chopping mode.
         Optically isolated signals I/O.
         Driver current is adjustable from 0.3A/phase to 5.2A/phase divided into 16 parts.
         Single power supply(AC40-110V)
         Phase remembering function.

Q3HB220M
Introduction
Q3HB220M is constant angle ,constant torque microstepping driver. This type driver supplies regulated phase current for supply voltage from AC110-220 is designed for use with the 3-phase hybrid stepper of all kinds with 86110mm outside diameter & 5.2A current max. The circuity that it adopts is similar to the circuit of servo control in theory which enable the motor run smoothly at low speed nearly without vibration & noise,output much greater torque at high speed than 2-phase & 5-phase hybrid stepper. The precision of location is up to 30,000 steps/rev.
Features
         High reliability,Low cost
         16 channel constant angle constant torque microsteps. Highest resolution up to 30,000 steps/rev.
         Unique control circuitry.
         Highest response frequency up to 200Kpps.
         Winding current will be reduced to set value when no step pulse command is received for 0.1 second.
         Bipolar constant current chopping mode.
         Optically isolated signals I/O.
         Driver current is adjustable from 0.3A/phase to 5.2A/phase divided into 16 parts.
         Single power supply(AC110-220V)
         Phase remembering function.